Buon giorno a tutti, sono nuovo del formu, ed inesperto completo dell' aero modellsmo.
Vuoi il caso, vuoi la moda del momento, sono rimasto affascinato dei quadricotteri e.....
Ho cominciato a perdere ore di sonno prezioso per documentarmi il più possibile.
Mi sento pronto per costruire il primo esemplare, ma senza aiuto mi Sto arrivando! Che rimane un progetto sulla carta. Ringrazio coloro che vorranno dedicarmi un po del loro tempo ed aiuto in anticipo.
Ora, avrei valutato una serie di componenti e credo possano funzionare.
Dovrebbe esserci tutto il necessario, voi che ne pensate? Non so che eliche acquistare, mancano credo solomquelle.
Progetto: quadricottero
Elettronica di comando: kk 2.0
The HobbyKing KK2.0 Multi-Rotor controller is a flight control board for multi-rotor Aircraft (Tricopters, Quadcopters, Hexcopters etc
Specs.
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega324 PA
Gyro: InvenSense Inc.
Accelerometer: Anologue Devices Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
--------------------
USBasp AVR Programming Device for ATMEL proccessors
Includes:
1 x USBasp Device
1 x 10-10-6 Cable
----------------------
Motori
Turnigy D2836/11 750KV Brushless Outrunner Motor
Spec.
Battery: 2~3 Cell /7.4~11.1V
RPM: 750kv
Max current: 14A
No load current: 0.8A
Max power: 210W
Internal resistance: 0.160 ohm
Weight: 71g (including connectors)
Diameter of shaft: 4mm
Dimensions: 28x36m
Prop size: 7.4V/12x6 11.1V/9x6
Max thrust: 800g
--------------
Esp
Turnigy AE-30A Brushless ESC
Specification:
Output: Continuous 30A, burst 35A up to 10 seconds.
Input Voltage: 2-4 cells lithium battery or 5-12 cells NIMH battery.
BEC: Linear 2A @ 5V
Control Signal Transmission: Optically coupled system.
Max Speed:
2 Pole: 210,000rpm
6 Pole: 70,000rpm
12 Pole: 35,000rpm
Size: 50mm (L) * 26mm (W) * 12mm (H).
Weight: 25g.
Features:
High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
---------------
Telaio
The Hobbyking X650F is a high quality folding-arm quadcopter
All necessary hardware is included, just add your own electronics.
Specs:
Weight: 598g (frame only)
Width: 550mm
Height: 265mm
Ground clearance: 155mm (bottom of frame), 185mm (camera mount rails)
Motor Bolt Holes: 16~30mm
Required:
Your own 4 channel transmitter and receiver
Multi-Rotor control board
20~40A brushless ESC x 4
3S 2200~3000mAh lipoly battery
28-XX/35-XX brushless motor x 4
9~11 inch propeller x 4 (2 standard/2 reverse rotation)
--------------------
Radio
The TURNIGY 9X
Number of Channnel: 8ch ppm/9ch pcm
Display: 128*64LCD
Support Type: Heli/Acro/Glid
Support user: 8
Stick model: 4
Encoder type: ppm/pcm
Subtrim: Yes
Simulator Interface: Yes
Buzzer: Yes
Low Voltage Show: Yes
Required:
Battery
Included:
Turnigy 9x 9Ch Transmitter
Turnigy RF9X-V2 module
Turnigy 9X8C-V2 8-channel receiver
Important.
The TURNIGY 9X has been reflashed with the new v2 firmware, fixing previous menu and mixing issues.
-------------
Batterie
Turnigy nano-tech 4000mah 3S 40~80C Lipo Pack (TRA2849 Slash/Rustler/Bandit/Stampede compatible)
Spec.
Capacity: 4000mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 40C Constant / 80C Burst
Weight: 321.0g (including plug & case)
Dimensions: 136 x 25 x 43mm
Discharge Plug: TRX plug.
---------
Mancano le eliche e personalmente, non saprei cosa fare, sapreste cosigliarmi?
Che ne dite del progetto? Potrebbe volare e far divertire un neofita.?
Grazie.
Saluti a tutti
Vuoi il caso, vuoi la moda del momento, sono rimasto affascinato dei quadricotteri e.....
Ho cominciato a perdere ore di sonno prezioso per documentarmi il più possibile.
Mi sento pronto per costruire il primo esemplare, ma senza aiuto mi Sto arrivando! Che rimane un progetto sulla carta. Ringrazio coloro che vorranno dedicarmi un po del loro tempo ed aiuto in anticipo.
Ora, avrei valutato una serie di componenti e credo possano funzionare.
Dovrebbe esserci tutto il necessario, voi che ne pensate? Non so che eliche acquistare, mancano credo solomquelle.
Progetto: quadricottero
Elettronica di comando: kk 2.0
The HobbyKing KK2.0 Multi-Rotor controller is a flight control board for multi-rotor Aircraft (Tricopters, Quadcopters, Hexcopters etc
Specs.
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega324 PA
Gyro: InvenSense Inc.
Accelerometer: Anologue Devices Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
--------------------
USBasp AVR Programming Device for ATMEL proccessors
Includes:
1 x USBasp Device
1 x 10-10-6 Cable
----------------------
Motori
Turnigy D2836/11 750KV Brushless Outrunner Motor
Spec.
Battery: 2~3 Cell /7.4~11.1V
RPM: 750kv
Max current: 14A
No load current: 0.8A
Max power: 210W
Internal resistance: 0.160 ohm
Weight: 71g (including connectors)
Diameter of shaft: 4mm
Dimensions: 28x36m
Prop size: 7.4V/12x6 11.1V/9x6
Max thrust: 800g
--------------
Esp
Turnigy AE-30A Brushless ESC
Specification:
Output: Continuous 30A, burst 35A up to 10 seconds.
Input Voltage: 2-4 cells lithium battery or 5-12 cells NIMH battery.
BEC: Linear 2A @ 5V
Control Signal Transmission: Optically coupled system.
Max Speed:
2 Pole: 210,000rpm
6 Pole: 70,000rpm
12 Pole: 35,000rpm
Size: 50mm (L) * 26mm (W) * 12mm (H).
Weight: 25g.
Features:
High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency.
---------------
Telaio
The Hobbyking X650F is a high quality folding-arm quadcopter
All necessary hardware is included, just add your own electronics.
Specs:
Weight: 598g (frame only)
Width: 550mm
Height: 265mm
Ground clearance: 155mm (bottom of frame), 185mm (camera mount rails)
Motor Bolt Holes: 16~30mm
Required:
Your own 4 channel transmitter and receiver
Multi-Rotor control board
20~40A brushless ESC x 4
3S 2200~3000mAh lipoly battery
28-XX/35-XX brushless motor x 4
9~11 inch propeller x 4 (2 standard/2 reverse rotation)
--------------------
Radio
The TURNIGY 9X
Number of Channnel: 8ch ppm/9ch pcm
Display: 128*64LCD
Support Type: Heli/Acro/Glid
Support user: 8
Stick model: 4
Encoder type: ppm/pcm
Subtrim: Yes
Simulator Interface: Yes
Buzzer: Yes
Low Voltage Show: Yes
Required:
Battery
Included:
Turnigy 9x 9Ch Transmitter
Turnigy RF9X-V2 module
Turnigy 9X8C-V2 8-channel receiver
Important.
The TURNIGY 9X has been reflashed with the new v2 firmware, fixing previous menu and mixing issues.
-------------
Batterie
Turnigy nano-tech 4000mah 3S 40~80C Lipo Pack (TRA2849 Slash/Rustler/Bandit/Stampede compatible)
Spec.
Capacity: 4000mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 40C Constant / 80C Burst
Weight: 321.0g (including plug & case)
Dimensions: 136 x 25 x 43mm
Discharge Plug: TRX plug.
---------
Mancano le eliche e personalmente, non saprei cosa fare, sapreste cosigliarmi?
Che ne dite del progetto? Potrebbe volare e far divertire un neofita.?
Grazie.
Saluti a tutti
Commenta